Gradian to Turn Converter
1 gon = 0.0025000000 tr
FORMULA
1 gon = 0.0025000000 tr
CONVERSION TABLE
| Gradian (gon) | Turn (tr) |
|---|---|
| 1 gon | 0.0025 tr |
| 5 gon | 0.0125 tr |
| 10 gon | 0.025 tr |
| 25 gon | 0.0625 tr |
| 50 gon | 0.125 tr |
| 100 gon | 0.25 tr |
| 250 gon | 0.625 tr |
| 500 gon | 1.25 tr |
| 1,000 gon | 2.5 tr |
COMMON VALUES
RELATED CONVERSIONS
About Gradian (gon)
Also called a gon or grad, the gradian divides a right angle into exactly 100 parts, making a full circle 400 gradians. Developed during the French Revolution alongside the metric system, gradians are used in some surveying instruments and are standard on scientific calculators alongside degree and radian modes.
About Turn (tr)
One turn equals one complete rotation (360 degrees or 2*pi radians). Used in mechanical engineering for specifying rotational counts, fastener tightening instructions (e.g., 'tighten an additional quarter turn'), and phase angles in signal processing where full cycles are the natural unit.
How to Convert Gradian to Turn
The conversion formula is: 1 gon = 0.0025000000 tr. To convert from Gradian (gon) to Turn (tr), use the formula above or the interactive converter at the top of this page.
FAQ
How many Turn in 1 Gradian?
1 Gradian (gon) equals 0.0025000000 Turn (tr).
How to convert Gradian to Turn?
Multiply the Gradian value by 0.0025000000 to get the equivalent in Turn. Formula: 1 gon = 0.0025000000 tr
What is the formula for Gradian to Turn conversion?
1 gon = 0.0025000000 tr
Glossary
-
Latitude & Longitude
Latitude and longitude are a geographic coordinate system using angular degrees to uniquely identify any point on Earth's surface, with latitude ranging ±90° and longitude ±180°.
-
Bearing
A bearing is the horizontal direction of travel or of a target, measured clockwise in degrees from north (0°/360°), with east at 90°, south at 180°, and west at 270°.