Milliradian to Turn Converter
1 mrad = 0.0001591549 tr
FORMULA
1 mrad = 0.0001591549 tr
CONVERSION TABLE
| Milliradian (mrad) | Turn (tr) |
|---|---|
| 1 mrad | 0.0001591549 tr |
| 5 mrad | 0.0007957747 tr |
| 10 mrad | 0.0015915494 tr |
| 25 mrad | 0.0039788736 tr |
| 50 mrad | 0.0079577472 tr |
| 100 mrad | 0.015915 tr |
| 250 mrad | 0.039789 tr |
| 500 mrad | 0.079577 tr |
| 1,000 mrad | 0.159155 tr |
COMMON VALUES
RELATED CONVERSIONS
About Milliradian (mrad)
One thousandth of a radian (approximately 0.0573 degrees), the milliradian is widely used in military and long-range shooting for scope adjustments and range estimation. At 1,000 meters, one milliradian subtends exactly one meter, making mental math for ballistic corrections straightforward.
About Turn (tr)
One turn equals one complete rotation (360 degrees or 2*pi radians). Used in mechanical engineering for specifying rotational counts, fastener tightening instructions (e.g., 'tighten an additional quarter turn'), and phase angles in signal processing where full cycles are the natural unit.
How to Convert Milliradian to Turn
The conversion formula is: 1 mrad = 0.0001591549 tr. To convert from Milliradian (mrad) to Turn (tr), use the formula above or the interactive converter at the top of this page.
FAQ
How many Turn in 1 Milliradian?
1 Milliradian (mrad) equals 0.0001591549 Turn (tr).
How to convert Milliradian to Turn?
Multiply the Milliradian value by 0.0001591549 to get the equivalent in Turn. Formula: 1 mrad = 0.0001591549 tr
What is the formula for Milliradian to Turn conversion?
1 mrad = 0.0001591549 tr
Glossary
-
Latitude & Longitude
Latitude and longitude are a geographic coordinate system using angular degrees to uniquely identify any point on Earth's surface, with latitude ranging ±90° and longitude ±180°.
-
Bearing
A bearing is the horizontal direction of travel or of a target, measured clockwise in degrees from north (0°/360°), with east at 90°, south at 180°, and west at 270°.