Zoll-Pfund-Kraft in Newtonmeter Umrechner
1 in·lbf = 0.112985 N·m
On this page
FORMULA
1 in·lbf = 0.112985 N·m
CONVERSION TABLE
| Zoll-Pfund-Kraft (in·lbf) | Newtonmeter (N·m) |
|---|---|
| 1 in·lbf | 0.112985 N·m |
| 5 in·lbf | 0.564924 N·m |
| 10 in·lbf | 1.1298 N·m |
| 25 in·lbf | 2.8246 N·m |
| 50 in·lbf | 5.6492 N·m |
| 100 in·lbf | 11.2985 N·m |
| 250 in·lbf | 28.2462 N·m |
| 500 in·lbf | 56.4924 N·m |
| 1,000 in·lbf | 112.9848 N·m |
COMMON VALUES
RELATED CONVERSIONS
Über uns Zoll-Pfund-Kraft (in·lbf)
One twelfth of a foot-pound (approximately 0.113 Nm), the inch-pound is used for precision fastener torque specifications on small components. Electronics assembly, bicycle component tightening, and firearm scope mounting screws often specify torque in inch-pounds for fine control.
Über uns Newtonmeter (N·m)
The SI derived unit of torque, one newton-meter is the torque produced by a force of one newton applied at a one-meter lever arm. Automotive engine specifications list peak torque in Nm (a family sedan produces 200-350 Nm), and bolt tightening specifications in maintenance manuals use newton-meters.
How to Convert Zoll-Pfund-Kraft to Newtonmeter
The conversion formula is: 1 in·lbf = 0.112985 N·m. To convert from Zoll-Pfund-Kraft (in·lbf) to Newtonmeter (N·m), use the formula above or the interactive converter at the top of this page.
Frequently Asked Questions
Wie viele Newtonmeter sind 1 Zoll-Pfund-Kraft?
1 Zoll-Pfund-Kraft (in·lbf) entspricht 0.112985 Newtonmeter (N·m).
Wie rechnet man Zoll-Pfund-Kraft in Newtonmeter um?
Multipliziere den Zoll-Pfund-Kraft-Wert mit 0.112985, um den entsprechenden Wert in Newtonmeter zu erhalten. Formel: 1 in·lbf = 0.112985 N·m
Was ist die Formel zur Umrechnung von Zoll-Pfund-Kraft in Newtonmeter?
1 in·lbf = 0.112985 N·m
Glossar
-
Newton
Die SI-Einheit der Kraft, gleich der Kraft, die benötigt wird, um 1 kg mit 1 m/s² zu beschleunigen.
-
Drehmoment
Das Drehmoment ist das rotatorische Äquivalent der Kraft, gleich der aufgebrachten Kraft multipliziert mit dem senkrechten Abstand zum Drehpunkt, gemessen in Newton-Metern (N·m) oder Pfund-Fuß (lb·ft).