पॉइंट → पिका रूपांतरक
1 pt = 0.083333 pc
FORMULA
1 pt = 0.083333 pc
CONVERSION TABLE
| पॉइंट (pt) | पिका (pc) |
|---|---|
| 1 pt | 0.083333 pc |
| 5 pt | 0.416667 pc |
| 10 pt | 0.833333 pc |
| 25 pt | 2.0833 pc |
| 50 pt | 4.1667 pc |
| 100 pt | 8.3333 pc |
| 250 pt | 20.8333 pc |
| 500 pt | 41.6667 pc |
| 1,000 pt | 83.3333 pc |
COMMON VALUES
RELATED CONVERSIONS
परिचय पॉइंट (pt)
The typographic point equals 1/72 of an inch (approximately 0.353 mm) and has been the standard unit for measuring font size since desktop publishing emerged. Body text is typically set at 10-12 points, headlines at 24-72 points, and fine print at 6-8 points. Word processors and design software default to point sizing.
परिचय पिका (pc)
Equal to 12 typographic points (1/6 of an inch, approximately 4.233 mm), the pica is used by graphic designers and typesetters for measuring column widths, margins, and gutters. Newspaper and magazine layouts are traditionally specified in picas, and InDesign and QuarkXPress support pica measurements natively.
How to Convert पॉइंट to पिका
The conversion formula is: 1 pt = 0.083333 pc. To convert from पॉइंट (pt) to पिका (pc), use the formula above or the interactive converter at the top of this page.
FAQ
1 पॉइंट में कितने पिका होते हैं?
1 पॉइंट (pt) = 0.083333 पिका (pc)।
पॉइंट को पिका में कैसे बदलें?
पिका में मान प्राप्त करने के लिए पॉइंट के मान को 0.083333 से गुणा करें। सूत्र: 1 pt = 0.083333 pc
पॉइंट से पिका रूपांतरण का सूत्र क्या है?
1 pt = 0.083333 pc
शब्दावली
-
पॉइंट (टाइपोग्राफी)
टाइप आकार की इकाई। डेस्कटॉप पब्लिशिंग पॉइंट 1/72 इंच के बराबर होती है।
-
पिक्सेल
डिजिटल डिस्प्ले या डिजिटल छवि पर व्यक्तिगत रूप से पता लगाने योग्य रंग का सबसे छोटा बिंदु (चित्र तत्व)।
-
DPI और PPI
DPI (डॉट्स प्रति इंच) प्रिंट आउटपुट रिज़ॉल्यूशन मापता है; PPI (पिक्सेल प्रति इंच) स्क्रीन डिस्प्ले रिज़ॉल्यूशन मापता है—दोनों छवि तत्वों का स्थानिक घनत्व बताते हैं।
-
एम (Em)
वर्तमान तत्व के फ़ॉन्ट आकार के बराबर एक सापेक्ष टाइपोग्राफिक इकाई; 16 px संदर्भ में, 1 em = 16 px।
-
पीका
टाइपोग्राफिक इकाई, 12 पॉइंट या ठीक 1/6 इंच (लगभग 4.233 मिमी) के बराबर, मुख्यतः कॉलम चौड़ाई और लेआउट आयाम मापने के लिए उपयोगी।