ไปกา เป็น นิ้ว (CSS) เครื่องมือแปลง
1 pc = 0.166667 in
FORMULA
1 pc = 0.166667 in
CONVERSION TABLE
| ไปกา (pc) | นิ้ว (CSS) (in) |
|---|---|
| 1 pc | 0.166667 in |
| 5 pc | 0.833333 in |
| 10 pc | 1.6667 in |
| 25 pc | 4.1667 in |
| 50 pc | 8.3333 in |
| 100 pc | 16.6667 in |
| 250 pc | 41.6667 in |
| 500 pc | 83.3333 in |
| 1,000 pc | 166.6667 in |
COMMON VALUES
RELATED CONVERSIONS
เกี่ยวกับ ไปกา (pc)
Equal to 12 typographic points (1/6 of an inch, approximately 4.233 mm), the pica is used by graphic designers and typesetters for measuring column widths, margins, and gutters. Newspaper and magazine layouts are traditionally specified in picas, and InDesign and QuarkXPress support pica measurements natively.
เกี่ยวกับ นิ้ว (CSS) (in)
The inch in typography equals 72 points or 6 picas and serves as the bridge between digital and physical measurements when designing for print. Page margins, bleed areas, and trim sizes in US print production are specified in inches, and printers calibrate output quality in dots per inch (DPI).
How to Convert ไปกา to นิ้ว (CSS)
The conversion formula is: 1 pc = 0.166667 in. To convert from ไปกา (pc) to นิ้ว (CSS) (in), use the formula above or the interactive converter at the top of this page.
FAQ
1 ไปกา เท่ากับกี่ นิ้ว (CSS)?
1 ไปกา (pc) เท่ากับ 0.166667 นิ้ว (CSS) (in)
วิธีแปลง ไปกา เป็น นิ้ว (CSS)?
คูณค่า ไปกา ด้วย 0.166667 เพื่อให้ได้ผลลัพธ์เป็น นิ้ว (CSS) สูตร: 1 pc = 0.166667 in
สูตรการแปลง ไปกา เป็น นิ้ว (CSS) คืออะไร?
1 pc = 0.166667 in
อภิธานศัพท์
-
พอยต์ (การพิมพ์)
หน่วยขนาดตัวพิมพ์ พอยต์ในการจัดพิมพ์บนเดสก์ท็อปเท่ากับ 1/72 นิ้ว
-
พิกเซล
พิกเซล (picture element) คือจุดสีที่เล็กที่สุดที่กำหนดได้แยกต่างหากบนจอแสดงผลดิจิทัลหรือในภาพดิจิทัล
-
DPI และ PPI
DPI (จุดต่อนิ้ว) วัดความละเอียดของเอาต์พุตการพิมพ์ PPI (พิกเซลต่อนิ้ว) วัดความละเอียดของจอแสดงผล ทั้งสองแสดงความหนาแน่นเชิงพื้นที่ขององค์ประกอบภาพ
-
เอ็ม (การพิมพ์)
หน่วยการพิมพ์แบบสัมพัทธ์ เท่ากับขนาดฟอนต์ขององค์ประกอบปัจจุบัน ในบริบท 16 px 1 em เท่ากับ 16 px
-
พิกา
หน่วยการพิมพ์ เท่ากับ 12 พอยต์ หรือ 1/6 นิ้วพอดี (ประมาณ 4.233 มม.) ใช้หลักในการวัดความกว้างคอลัมน์และมิติของเลย์เอาต์