इंच (CSS) → पिका रूपांतरक
1 in = 6.0000 pc
On this page
FORMULA
1 in = 6.0000 pc
CONVERSION TABLE
| इंच (CSS) (in) | पिका (pc) |
|---|---|
| 1 in | 6 pc |
| 5 in | 30 pc |
| 10 in | 60 pc |
| 25 in | 150 pc |
| 50 in | 300 pc |
| 100 in | 600 pc |
| 250 in | 1,500 pc |
| 500 in | 3,000 pc |
| 1,000 in | 6,000 pc |
COMMON VALUES
RELATED CONVERSIONS
परिचय इंच (CSS) (in)
The inch in typography equals 72 points or 6 picas and serves as the bridge between digital and physical measurements when designing for print. Page margins, bleed areas, and trim sizes in US print production are specified in inches, and printers calibrate output quality in dots per inch (DPI).
परिचय पिका (pc)
Equal to 12 typographic points (1/6 of an inch, approximately 4.233 mm), the pica is used by graphic designers and typesetters for measuring column widths, margins, and gutters. Newspaper and magazine layouts are traditionally specified in picas, and InDesign and QuarkXPress support pica measurements natively.
How to Convert इंच (CSS) to पिका
The conversion formula is: 1 in = 6.0000 pc. To convert from इंच (CSS) (in) to पिका (pc), use the formula above or the interactive converter at the top of this page.
Frequently Asked Questions
1 इंच (CSS) में कितने पिका होते हैं?
1 इंच (CSS) (in) = 6.0000 पिका (pc)।
इंच (CSS) को पिका में कैसे बदलें?
पिका में मान प्राप्त करने के लिए इंच (CSS) के मान को 6.0000 से गुणा करें। सूत्र: 1 in = 6.0000 pc
इंच (CSS) से पिका रूपांतरण का सूत्र क्या है?
1 in = 6.0000 pc
शब्दावली
-
पॉइंट (टाइपोग्राफी)
टाइप आकार की इकाई। डेस्कटॉप पब्लिशिंग पॉइंट 1/72 इंच के बराबर होती है।
-
पिक्सेल
डिजिटल डिस्प्ले या डिजिटल छवि पर व्यक्तिगत रूप से पता लगाने योग्य रंग का सबसे छोटा बिंदु (चित्र तत्व)।
-
DPI और PPI
DPI (डॉट्स प्रति इंच) प्रिंट आउटपुट रिज़ॉल्यूशन मापता है; PPI (पिक्सेल प्रति इंच) स्क्रीन डिस्प्ले रिज़ॉल्यूशन मापता है—दोनों छवि तत्वों का स्थानिक घनत्व बताते हैं।
-
एम (Em)
वर्तमान तत्व के फ़ॉन्ट आकार के बराबर एक सापेक्ष टाइपोग्राफिक इकाई; 16 px संदर्भ में, 1 em = 16 px।
-
पीका
टाइपोग्राफिक इकाई, 12 पॉइंट या ठीक 1/6 इंच (लगभग 4.233 मिमी) के बराबर, मुख्यतः कॉलम चौड़ाई और लेआउट आयाम मापने के लिए उपयोगी।